Wooden head shellHS-1A African Black Wood made 8,190yen 

HS-1AsAfrican Black Wood made with 6N Copper shell lead 11,550yen

 HS-1A, HS-1As are the new-style head shell that improved head shell HS-1 made of the African ebony that we are launching from last year handily. HS-1 is receiving high evaluation for instance, receive the popularity and select to the excellent prize of an audio accessories magazine. However, as for a recent cartridge, there are many products that screw has been cut in the main body and was receiving such indication that the attachment is not produced the product like that. Thereupon, we did to that changes it to a long hole after we wrench off the cartridge attachment department of the shell main body in our company. Thus most of the cartridges come to be able to be used.

The merchandise becomes the product called HS-1A of only the change of this attachment hole department. HS-1As of the simultaneous launching is the product of the special specification that is to the shell the original neighbour bronze shaving of our company and set the pin terminal and adopted the excellent 6N copper wire of the tone quality to the shell lead. This HS-1As the terminal on the side of the arm is able to expect even the tone quality improvement effect by the decrease of an electric point of contact because the lead wire is being done the soldering. Yet, please pay attention because this HS-1As is not able to exchange the shell lead.


The African ebony is the material of the beautiful black of the sound that is used to the oboe and the clarinet. There is specific gravity about 1.4 and have the value close to the highest among the wood matelial the strength. Therefore we did as make the attachment hole to head shell oneself and be fix to the cartridge directly. There is not a problem at all in terms of the strength. As for the head shell the most have been made with the metal until the present. It is because it was difficult that it obtains the accuracy and strength in wood matelial etc. in terms of the strength and processing accuracy. Our company, because be good the wood matelial and plastic precise processing technology the processing of the wooden head shell that utilizes the technology and match to the analog player was enabled.

It is many firm advantages in the wood matelial. One is given that sharp resonance is difficult to go out because the department loss is big soon. Even to the metal remains to speaker box etc. and be not used the is easy to resonate be a factor. It is conceivable that the influence of the resonance of the whole arm is big even the head shell. It is conceivable that it can restrain the influence of the resonance fairly, by using the head shell of the big wood matelial of the inside loss there.

HS-1A, HS-1As fit the wind of the wood matelial and apply the wood matelial protection paint of the echo paint system that does the touch of a material carefully and almost there is not an influence in the human body and be finishing with the buff finish. Please feel realistically of wood matelial original appearance/warmth that holds. It differs entirely from the shell made of general metal and be natural and please confirm a gentle sound with your ear by all means to the ear.

Because the prudence is light belonging of we stop this product and caused to belong the gold plating screw made of the brass to the screw. The brass is able to increase the prudence a little when the long screw of the length is used because specific gravity is big. Because it has performed the gold plating in the top where did the foundation without the magnetism to the brass screw feeling relieved you could use it.

Also, the influence of the magnetic force feels relieved at a big MC cartridge, because apply the finger of HS-1A and HS-1As be performing the gold plating without the magnetism to the screw and could use.

 

HS-1A spec.

Material: the body: the African Black Wood ( echo paint buff finish ) Finger gambling department: Umagnetism gold plating brass / External form measure: 18 (W) 50 (L) 18 (H) the attachment department is eliminated

Without including the attachment screw the prudence: 10.6 g

Accessories: the gold plating brass attachment screw 3 size belonging / made of the standard type shell lead belonging / Price: 8,190yen

HS-1As spec.

Material: the body: the African Black Wood ( echo paint buff finish ) Finger gambling department: Umagnetism gold plating brass / External form measure: 18 (W) 50 (L) 18 (H) the attachment department is eliminated

Without including the attachment screw the prudence: 11.2 g / Accessories: the gold plating brass attachment screw 3 size belonging / 6N copper wire shell lead belonging

Shell lead department of HS-1As: 10pcs. of 0.18 mm dia.

6N copper wire Admitting it to the Teflon tube it is using it.

Price: 11,550yen *Please pay attention because the shell lead is not able to exchange it.



その他 : 弊社の加工技術を駆使した木材、樹脂等の精密加工も承っています。(詳細はお問い合わせください)
Besides: the processing technology of our company even the precise processing of the lumber, resin etc. that utilized it are informed. (Inquire the details)


山本音響工芸 ホームページトップ
Yamamoto Sound Craft Homepage TOP

日本語English


山本音響工芸株式会社 675-1323兵庫県小野市榊町726 TEL0794-62-5655 FAX0794-63-6405
Yamamoto Sound Craft Corp. 726 Sakaki-tyo Ono-city Hyogo 675-1323 Japan / Tel 81-794-62-5655 Fax 81-794-63-6405

お問い合わせ(Inquiry): shige-y@mh1.117.ne.jp
担当(Charge):山本(Yamamoto)


Copyright ? 2002-2009 Yamamoto Sound Craft All Rights Reserved.